Omron E5C series User Manual page 302

6 Parameters
prlt
• This parameter sets the key pressing time required to move to the Protect Level from the
Operation Level, the Adjustment Level, or Monitor/Setting Item Level.
Function
Setting
cjc
• This parameter specifies whether cold junction compensation is to be performed
internally by the Digital Controller or to be performed externally when the input type
setting is 5 to 24.
Function
• The cold junction compensation external setting is enabled when the temperature
difference is measured using two thermocouples or two ES1B Sensors.
Setting
Related Parameters
See
See
Input Type (Initial Setting Level): Page 6-42
6 - 70
Move to Protect Level Time
Setting range
1 to 30 Seconds
Cold Junction Compensation
Method
Setting range
on: Internally, off: Externally
Unit Default
3
Input type must be thermocouple or infrared
temperature sensor
Default
on
E5@C Digital Temperature Controllers User's Manual (H174)