Avaya 3616 Installation Manual page 55

• Confirm Supported Data Rates
Press FCN to display Det1 on the base of the display. The phone is now showing full
details for an individual access point. Use this to confirm signal strength and supported
data rates. Use the right arrow key to display the second best access point, arrow again
to the third best, and so on to the fourth best. The left arrow key steps you back to the first
best.
•
•
•
•
•
9. When testing is complete, to power off the wireless phone press Power Off/End Call.
3600 Series IP Phone Installation
IP Office 4.0
#:
dB
Detl
#: the number (1-4) of the access point.
Full MAC: the MAC address of the access point.
dB: the signal strength of the access point.
Ch: the channel of the access point.
1b2b5b11b is an example of the data rates that may be displayed.
Each data rate (1,2,5.5, or 11Mbit/sec) that is supported by the access point is
shown. Those rates that are in the Basic Rate set (sometimes referred to as
"required" rates) are indicated by a 'b' following the rate number. The Supported
and Basic data rate(s) should be the same on all access points as is appropriate
for your environment.
Full MAC
Ch 1b2b5b11b
15-601082 Issue 05a (22nd May 2007)
4. Certifying the Installation
Page 55