Pride Mobility Jet1 Owner's Manual page 22

JOYSTICK FUNCTIONS
The joystick function is similar for all controller configurations. The joystick controls the direction and speed of the
power chair. See figure 25. When you move the joystick from the neutral (center) position, the electromagnetic
brakes release and allow the power chair to move. The further you push the joystick from its neutral position, the
faster your Jet 1 moves. When you release the joystick and allow it to return to the neutral position, you engage the
electromagnetic brakes. This causes the chair to decelerate and come to a complete stop. If your Jet 1 begins to
move in an unexpected manner, immediately release the joystick. Unless the joystick is damaged, this action should
stop your Jet 1.
Speed and Response Adjustments
Dynamic DL controller joysticks have only one knob that combines the speed and response functions. See figure
24. When you increase the speed, you decrease the sensitivity. When you decrease the speed, you increase the
sensitivity.
NOTE: We recommend that you turn the speed and response knob to the slowest setting the first few times
you operate your Jet 1 to allow you to become familiar with your new power chair.
Charger Inhibit Plug Connection
The charger inhibit connector on the utility tray is coded with colored dots. The dots are positioned so that you
align the flat side of the male connector with the flat side of the female connector before making the connection.
CAUTION! Failure to properly align the connectors can result in damage to the controller, the
charger harness, and the connectors.
22
V I I . O P E R A T I O N
Figure 25. Joystick Functions
Jet 1