Pride Mobility Jet1 Owner's Manual page 12

Power chairs

Hide thumbs Also See for Jet1:

Table of Contents

FREEWHEEL LEVERS

For your convenience, your Jet 1 is equipped with two freewheel levers. See figures 5 and 6. These levers allow

you to disengage the drive motors and maneuver the chair manually.

WARNING! DO NOT use your Jet 1 while the drive motors are disengaged unless you are in the

presence of an attendant! DO NOT disengage the drive motors when your Jet 1 is on an incline. The

chair could roll down on its own, causing injury!

To engage or disengage the freewheel feature:

1. Turn the freewheel levers outward to disengage the

drive motors. See figure 5.

2. Turn the freewheel levers inward, to engage the drive

motors. See figure 6.

NOTE: It is important to remember that when your Jet 1

is in freewheel mode, the braking system is disengaged.

If a lever is difficult to move in either direction, rock your Jet 1

back and forth slightly. The lever should then move to the

desired position.

I I I .

T H E

J E T

Figure 5. Drive Disengaged

Figure 6. Drive Engaged

FREEWHEEL LEVERS

(TURNED IN)

Jet 1

Table of Contents