Getting Ready To Print - Xerox Document Centre 400 series User Manual

1.1
This section explains the procedure for setting up the printer. The flow of operations is as follows:
1
2

Getting Ready to Print

Check that the printer is switched off before handling it. If not, there is a danger of electric shock.
Connect the cable and allocate memory.
"Chapter 2 Setting Up"
When connecting to the
host device directly
Parallel
Serial
Carry out the necessary installation and
setting to the host device.
The printer control panel also needs to be
set.
"Chapter 4 Installing/Configuring the
Printer Drivers"