Printer Functions - Xerox Document Centre 400 series User Manual

3.7
This section explains about the relations between the printing function and the copying/faxing functions.
Auto Tray Switch
When printing is done by auto paper supply, the Auto Tray Switch feature will usually be
activated. This feature is independent of the copying/faxing function setting.
Paper Tray Priority
For the printing function, the trays are allocated priority as follows: Tray 1, Tray 2,
Tray 3 and then Tray 4 (Tray 1 has the highest priority). This feature is independent
of the copying/faxing function setting.
When the High-Capacity Feeder is installed, the allocated priority is: Hi-Cap. Feeder 1,
Hi-Cap. Feeder 2, Tray 1 and Tray 2.
Printing Priority
Printing will be prioritised according to the setting made from the main frame control
panel. The priority can be chosen from the following: Printer Document, Fax Receive
Document, Auto-Output Report.
Copy/fax functions and their relation with printer function
Operating the main frame control panel
• No printing can be done when operating the main frame control panel. However,
printing instructions can be received from the host device.
• When a certain time* has passed after operating the main frame control panel,
documents specified from the host device will be printed.
Transmitting
Document with printing instruction specified from the host device will be printed according
to the order received.
Copying
Outputting received document
• Printing cannot be done during copying and outputting received document. However,
printing instructions can be received from the host device.
• After all the documents of copying and outputting received document are ejected,
documents with printing instructions from the host device will be printed.

Printer Functions

User Guide (Facsimile) for the setting method.
3
37