Xerox Document Centre 400 series User Manual page 107

Menu Item Explanation
NetWare* (con't...) • PJL Switch - Look (2)
Sets the PJL commands sent from the host device to valid or invalid.
The candidate values are as follows:
• ON (Default)
• OFF
EtherTalk* To be set when using the EtherTalk port:
• PDL Mode - Note (1), Look (1)
Sets the PDL mode.
The candidate value is as follows:
• PostScipt 3 (Default)
• PJL Switch - Look (2)
Sets the PJL commands sent from the host device to valid or invalid.
The candidate values are as follows:
• ON
• OFF (Default)
* Optional
Note (1): PostScript and Auto will be displayed only if the PostScript option is installed.
Look (1): When set to Auto and the automatic determination of print language finds that the particular
language is not installed, or that there is no corresponding target language, the data will be erased.
(2): When a language not installed in the printer is specified by PJL command, the data will be erased.
Accepts PJL commands.
Ignores PJL commands.
Processes data received from the host device as PostScript language.
Accepts PJL commands.
Ignores PJL commands.
5.3 Common Menu Items
95
5