To Assign Menus To Custom Buttons - Sony RCP-1500 Operation Manual

To delete a paint menu item from the custom paint
menu
1
Turn the SELECT knob to select the paint menu item
to delete in the top list.
2
[Delete]
Press .
The selected paint menu item is deleted from the top list.
3
Select the paint menu item above a separator line and
[Line]
then press when you want to delete a separator
line.
4
[Save]
Press .
The confirmation message screen appears.
5
[Save]
Press .
The contents of the custom paint menu are saved and
registered to the control panel.
To reset the custom paint menu to the default
settings
1
[Default All]
Press .
The confirmation message screen appears.
2
[OK]
Press .
The contents of the custom paint menu are reset to the
default settings.
3
[Save]
Press .
The confirmation message screen appears.
4
[Save]
Press .
The contents of the custom paint menu are saved and
registered to the control panel.

To assign menus to custom buttons

You can assign any menu to a custom button on the control
panel. A menu can also be assigned to an assignable button
that has been assigned as a custom button.
1
Enter engineer mode. (page 52)
2
Press the MENU button.
The menu closes and the control panel remains in
engineer mode.
3
Display the RCP Config screen. (page 51)
RCP Config
Display
Customize
/Sound
Date
Network
/Time
48
Settings
Exit
VR
Mode
Setting
Infor-
Security
mation
Backup
4
[Customize]
Press .
The Customize screen appears.
RCP Customize
Menu SW
Customize Customize
Standard
Ind
5
[Custom Menu SW]
Press
The Custom Menu SW screen appears.
Custom Menu SW
All of the custom buttons light immediately after this
screen is displayed.
6
Press the button for which to change the assigned
function.
The function that is currently assigned to the pressed
button appears in the Custom Menu SW screen.
A list of assignable functions also appears.
Custom Menu SW
NO ASSIGN
NO ASSIGN
5600K
AUTO KNEE
SKIN DETAIL
GATE
SATURATION
CONTRAST
BLACK GAMMA
CHARACTER
KNEE APERTURE
7
Turn the adjustment knob on the far left to select the
function to assign to the button.
Turning the adjustment knob on the far left moves the
cursor (B) in the list up or down. If you align the cursor with
an assignable function, that function name is displayed in
amber.
8
[Enter]
Press .
The function assigned to the button changes to the
function that was selected in the previous step. At that
time, "*" appears in front of the function name.
Exit
Custom VR
Menu SW Customize
.
Exit
Enter
Default
Save
All
Exit
Enter
Default
Save
All