Menu Operations; Displaying Menus - Sony RCP-TX7 Operating Instructions Manual

Menu Operations

Location and Function of Parts

Displaying menus

Press one of the menu selection buttons to have the
corresponding menu displayed in the LCD panel. To
access the AUTO SKIN menu (see peges 17 and 19),
however, press the AUTO SETUP SKIN DETAIL
button (see page 6).
The menus that correspond to the buttons are listed
below.
Most of menus consist of several pages which are
divided into two types: normal setting pages and
advanced setting pages. This unit is allowed to access
only normal setting pages when it is powered on.
To access advanced setting pages, follow the
procedure described below and set the unit to the
advanced setting mode.
12
Setting the unit to the advanced setting
mode
OPERATION
PAINT
1
Set the OPERATE knob to "PAINT".
"ADV>" appears on the LCD panel.
2
Set the OPERATE knob to "FULL" while pressing
down the setting button on the right of the
"ADV>" indication.
Note
During menu operations, the message "ITEM NOT
AVAILABLE" appears on the LCD panel under the
following situations. Wait until the message
disappears and perform correct operations.
• When using the DXC-D30/D30P, trying to access a
menu consisting of only advanced setting pages (such
as the GAMMA or SHADING menu) without setting
the unit to the advanced setting mode
• When using the DXC-637 series, pressing a menu
selection button which does not operate for the DXC-
637 series (such as the DETAIL button)
1,2
2
ADV>