Sony RCP-1500 Operation Manual page 57

Paint menu
Menu Submenu
Detail
1/3
2/3
3/3
Switch Control item
OFF
Level
Limiter
Crisp
Level Dep
Level Dep Off
H/V Ratio
Frequency
Mix Ratio
Detail Comb
W Limiter
B Limiter
Fine DTL
Fine DTL
Knee Apt
Knee Apt
Description
Corrects the contour.
Disables the detail function.
This is the first page of detail adjustment.
Adjusts the contour correction level. Adjusting this in the plus direction
makes pictures sharp, and adjusting this in the minus direction makes
pictures soft. For cameras with an electronic software focus function, this
enables softer pictures than when in the DTL OFF state.
Makes adjustments so that contour correction is not greater than a set level
to prevent overcorrection by strong contour correction when shooting
subjects with large luminance differences. Adjusting this in the plus
direction also enables clipping of objects with small luminance differences.
Makes adjustments so that signals with small luminance differences are
considered to be noise and correction is not applied to them in order to
reduce the emphasizing of also the contours of noise by the contour
correction function. Adjusting this in the plus direction results in luminance
differences for which contour correction is not performed becoming large
and improvements in S/N sensitivity, but resolution sensitivity deteriorates.
Contour correction is not applied to the dark parts and S/N sensitivity is
increased in order to reduce the emphasizing of also the contours of noise
by the contour correction function. Adjusting this in the plus direction
results in contour correction not being applied up to a brighter level.
Disables the Level Dep function.
This is the second page of detail adjustment.
Adjusts the horizontal and vertical ratio of contour correction.
Adjusts the center frequency of contour correction.
With a type of camera that creates a contour correction signal from
gamma, adjusts the ratio for adding that correction signal before and after
the gamma.
Reduces cross color noise by applying the comb filter to contour correction
signals. Adjusting this in the plus direction reduces cross color noise, but
resolution sensitivity deteriorates. This can only be used when an SD
camera is connected.
This is the third page of detail adjustment.
This is the limiter correction for detail signals added in the white direction.
This is the limiter correction for detail signals added in the black direction.
Attenuates the contour correction signal. Adjusting this in the plus direction
attenuates the signal. This can only be used when an SD camera is
connected.
Enables the Fine DTL function. This can only be used when an SD camera
is connected.
Adjusts the resolution sensitivity of high-luminance parts for which knee is
applied.
Enables the Knee Apt function.
57
Menus