Operating Screen Example - Panasonic CZ-256ESMC2 Operation Manual

6 Using the System

6.2.2 Operating screen example

The gure below shows a typical operating screen.
Filter cleaning sign
This lights when a filter
cleaning sign has been
Main menu
issued for an indoor unit.
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
Timer
operation
mark
This lights
when an
indoor unit
is set up
for timer
operation.
Tenant selection window
Scrolls the display of
Allows direct selection of
tenants.
tenant names.
* See next page for details.
Notification column
Displays alarms, errors, and other messages.
Intelligent Controller – 1 – 01 – 08
Indoor address (1-64)
Outdoor address (1-30)
Link number (1,2)
Adaptor number (Intelligent Controller, 1-7)
Filter cleaning signs are issued only as approximate guides. We recommend that filters be cleaned
regularly, even if no sign has been issued.
16
Outputs hardcopies
Sub menu by the printer.
Operate on all
units
Displays tenant
name.
Displays unit
name.
Scrolls the
columns
displaying indoor
units.
Displays the current date and time.
Reset button
Stops the buzzer and resets
the alarm display. (Depends on
the type of alarm.)
6 Using the System
* Selection windows
When you touch [Tenant] (or whatever is displayed in blue between the scroll buttons) shown on the
previous page, the items available for selection appear in a list as follows, enabling direct selection.
[Tenant] list
A similar list appears for the other buttons.
[I/D unit] list [Weekly timer] list
17
Tenant holiday [Date] list