Each Tenant Details] Screen; All Units] Screen - Panasonic CZ-256ESMC2 Operation Manual

B Control section
Shows controls for possible operation steps such as
start/stop switching, operation mode selection, temperature
selection, fan speed setting, fan direction setting etc.
If the logged in user has only general user privileges,
buttons for restricted operation steps will be grayed out
(inactive).
The REMOTE CONTROL and CHECK buttons will not
be displayed.
C Send button
Sends the changes made to the
Intelligent Controller.
D Cancel button
Cancels the changes made.
E CHECK buttons
Used to check the timer setting and remote control
prohibition setting status.
(See "3-7. Program Timer Screen" and "3-9. Prohibit
Remote Control Screen".)
Clicking the Return button will return the display to the
previous screen.
Remote control window for general user
4
Screen Display and Operation

3-2. [Each Tenant Details] Screen

When you use the menu to select [1. Status/Control : 2. Each tenant details], a screen such as shown
below appears. (Screen details may differ depending on the user logged in.) Operation principles for this
screen are similar to those of the "3-1. [Each tenant] screen".

3-3. [All Units] Screen

When you use the menu to select [1. Status/Control : 5. All units], a screen such as shown below
appears. (Screen details may differ depending on the user logged in.) A maximum of 256 indoor units are
displayed in 1 screen. Operation principles for this screen are similar to those of the "3-1. [Each tenant]
screen".
Screen Display and Operation
5