Displaying General Information By Zone; Main; Displaying Detailed Information By Zone - Panasonic CZ-256ESMC2 Operation Manual

6 Using the System

6.4.3 Displaying general information by zone

Use this screen to display the state of all units in a zone and to operate those units.
Procedure
Select 1.Status/Control in the main menu and 3.Each zone in the sub menu.
1 When you touch a unit name, a remote control window for individual operations appears.
2 When you touch a zone name, a remote control window for operating all units in the zone
appears.
3 When you touch All units , a remote control window for operating all connected units appears.
1.Status/Control
1.Each tenant
2.Total data/Cut-off
3.Distrib. ratio/Usage 2.Each tenant details
4.Maintenance/Test Run 3.Each zone
4.Each zone details
5.Initial settings
5.All units
6.Auxiliary settings
2
1
1
Move the display position on the
screen up and down one line.
The rst twelve characters are displayed for zone names and unit names.
36
1 3
1 3
6 Using the System

Main

Sub

6.4.4 Displaying detailed information by zone

Use this screen to display detailed settings and operating for each zone.
Procedure
Select 1.Status/Control in the main menu and 4.Each zone details in the sub menu.
1 When you touch a unit name, a remote control window for individual operations appears.
2 When you touch a zone name, a remote control window for operating all units in the zone
appears.
3 When you touch All units , a remote control window for operating all connected units appears.
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
3 6.Auxiliary settings
2
1.Each tenant
2.Each tenant details
3.Each zone
4.Each zone details
5.All units
1
1
37
1 4
1 4
Main Sub
3