Displaying Pulse Meter Total Data; Main; Performing Manual Cut-Off Processing And Saving Data; Manual Cut-Off Processing - Panasonic CZ-256ESMC2 Operation Manual

6 Using the System

6.5.4 Displaying pulse meter total data

Use this screen to check the pulse count and other such cumulative data for pulse meters.
Procedure
Select 2. Total data/Cut-off in the main menu, and 4. Pulse meter in the sub menu.
1 Selects the pulse meter connection destination.
2 Selects either the current or the past (maximum 24 months) cut-off data.
3 Selects the time zone to display.
* This button will be invalid when setting the mode at "No Distrib.". (see
1.Status/Control
2.Total data/Cut-off 1.Each I/D unit
3.Distrib. ratio/Usage 2.Each tenant
4.Maintenance/Test Run 3.Each O/D unit
5.Initial settings 4.Pulse meter
6.Auxiliary settings 5.Cut-off/Data backup
Intelligent Ctrl
1
Adapter 1
Adapter 2
:
Adapter 7
If the product type is HOT Multi, unit amount will be displayed in m
metering".
42
2 4
2 4

Main

Sub
5 1
5 1
Main Sub )
1.All hours
2.Regular hours
3
3.Out of hours
4.Special Day
2
3
or liters. The meter type will be "fuel
6 Using the System

6.5.5 Performing manual cut-off processing and saving data

Use this screen to perform manual cut-off processing, and to back up setting and total data to
optional PC Cards.

6.5.5.1 Manual cut-off processing

Proceed as follows to manually perform cut-off processing.
Procedure
Select 2.Total data/Cut-off in the main menu and 5.Cut-off/Data backup in the sub menu.
1 Touch Cut-off .
1.Status/Control
2.Total data/Cut-off 1.Each I/D unit
3.Distrib. ratio/Usage 2.Each tenant
4.Maintenance/Test Run 3.Each O/D unit
5.Initial settings 4.Pulse meter
6.Auxiliary settings 5.Cut-off/Data backup
2 When a window like the one shown below
appears, touch the OK button.
43
2 5
2 5
Main Sub
1
4
7
bk
3 When a window like the one shown below
appears, touch the Check button.