Setting The Date, Cut-Off Date, And Distribution Ratio Calculation Method; Main Sub - Panasonic CZ-256ESMC2 Operation Manual

6 Using the System
6.3.2 Setting the date, cut-off date, and distribution ratio calculation
method
Use this screen to set the current date and time, and make settings related to time.
These settings are needed for program timers and distribution ratio calculation, so be sure to
make them before starting operation of the system.
Procedure
Select 5.Initial settings in the main menu and 1.Date/Distrib. in the sub menu, then proceed as
follows.
1 Set the current date and time.
Under "(1) Current time", select the current year, month, day, hour, minute, and second from
the drop-down lists( ).
The day of the week is shown automatically.
Press the Set button to set the settings.
2 Set the monthly cut-off day.
Under "(2) Cut-off day", select a number from 1 to 28 or End (to select the last day of the
month) from the drop-down list( ).
1.Status/Control
2.Total data/Cut-off 1.Date/Distrib.
3.Distrib. ratio/Usage 2.CNTR/Unit/Ten. No.
4.Maintenance/Test Run 3.Ten. name/Distrib. Gr.
5.Initial settings 4.Pulse meter setting
6.Auxiliary settings 5.Clear accum. data
If the time set is ahead of the current time, the program timer set in that period becomes invalid
and transmission is not performed.
22
5 1
5 1
6 Using the System
Main Sub
3 Select the calculation target of power distribution.
(3) Select T/S ON+OFF time , T/S ON time , or No Distrib. .
- T/S ON + OFF time
To be selected when taking power both for the outdoor and indoor units to make distribution
calculation.
- T/S ON time
To be selected when taking power only for the outdoor unit to make distribution calculation.
- No Distrib.
To be selected when distribution calculation for gas and electricity is unnecessary.
4 Select the energy savings distribution settings.
(4) Select Each O/D sys. or Each Dist. Gr. .
This item cannot be selected when No Distrib. has been set for "(3) Calc. target of power
distribution".
Select a range where the energy savings effect in 3 WAY units can be re ected on the
distribution calculation.
- Each O/D sys.
The energy savings operation in 3 WAY units is re ected only on the air conditioning
distribution for the tenant for the outdoor system.
- Each Dist.Gr.
The energy savings operation in 3 WAY units is re ected on air conditioning distributions
for all the tenants in the overall distribution group including them.
(However, this is effective only when plural distribution groups have been set.)
5 In the Language pull-down menu (5), select the language you would like to use.
1
2
3
4
5
5 1
5 1
Main Sub
23