Power Off Button; Web Settings; Main Sub - Panasonic CZ-256ESMC2 Operation Manual

6 Using the System

6.8.9.8 Power off button

8 Always touch this button before powering the Intelligent Controller off.
A message appears asking if you want to exit the program. Touch OK in the message.
The system saves current data, and then displays a message "It is now safe to turn off the
Intelligent Controller." Wait until this message appears before powering the system off. (If there
is a large amount of data, several minutes may be required for this message to appear.)
!!
Powering off before this message appears may cause malfunction or prevent booting.
68
6 9
6 9
6 Using the System
Main Sub

6.8.10 WEB settings

Settings related to WEB such as the site name, mail settings, and network settings are possible.
Procedure
Select 6. Auxiliary settings in the main menu and 10. WEB settings in the sub menu.
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
For items 1, 4 to 6, and 8 to bn, touch each input box and a soft keyboard will appear.
1 Input the name of an optional site (within 40 characters).
2 Set the automatic updating interval on the screen displayed on Web browser. When selecting
"Invalid", data will not be updated until pressing the New button on the WEB browser screen.
3 Send the test mail.
4 Input the IP address (or domain name) of the mail (SMTP) server separately contracted.
5 Input an optional transmitter account name (mail address) (within 40 characters).
6 Input the receiver account name (mail address) (within 40 characters).
7 Select this check box to enable DHCP instead of using a xed IP address.
When DHCP is enabled, input for items 8 to bk is disabled.
8 Input the Intelligent Controller IP address (or domain name).
Refer to settings for other equipment (PC, router, etc.).
9 Input the Intelligent Controller subnet mask.
Refer to settings for other equipment (PC, router, etc.).
bk Input the IP address of the default gateway connected to the Intelligent Controller as necessary.
1.Zone name
2.ZoneNo./Mng.target
3.Program timer
4.Ten.Ho/TimerSp.Day
5.Prohibit R/C
6.Distribution time zone
7.Special distrib. day
8.I/D unit settings
9.Other settings
10.WEB settings
11.User settings
69
6 10
6 10
Main Sub
3
1
2
bo
4
5
6
7
8
9
bk
bl
bm
bn