Main Sub; Programming Timers; Programming Daily Timers - Panasonic CZ-256ESMC2 Operation Manual

6 Using the System

6.8.3 Programming timers

Up to 50 types of daily timers and 50 types of weekly timers can be programmed. It is also possible
to set holidays or timer special days for tenants.

6.8.3.1 Programming daily timers

Up to 50 types of daily timers can be programmed, with up to 50 times per day. Start/stop,
operation mode, temperature settings, and remote control prohibition can be programmed.
Procedure
Select 6.Auxiliary settings in the main menu and 3.Program timer in the sub menu.
1.Zone name
2.ZoneNo./Mng.target
3.Program timer
4.Ten.Ho/TimerSp.Day
5.Prohibit R/C
1.Status/Control 6.Distribution time zone
2.Total data/Cut-off
7.Special distrib. day
3.Distrib. ratio/Usage
8.I/D unit settings
4.Maintenance/Test Run 9.Other settings
5.Initial settings 10.WEB settings
6.Auxiliary settings 11.User settings
1
2
6
7
8
9
1 With Daily timer, select a timer number ( D1 to D50 , Holiday , Sp1 to Sp5 ).
The Holiday number is reserved for tenant holiday settings.
The timer numbers Sp1 to Sp5 are reserved for setting timer special days.
2 Touch the Set time column.
3 Select the time to set.
56
6 3
6 3
6 Using the System
Main Sub
4 Touch Set to con rm the time.
5 Touch Cancel to cancel the setting.
The display changes to "—".
6 Touch the Start/Stop column and set in the following window.
Programs the timer to
start the unit.
Cancels the setting.
7 Touch the Op mode column and set in the following window.
3
5
Cancels the setting.
4
6 3
6 3
Main Sub
Closes the window.
Programs the timer to stop the unit.
Confirms the setting.
Closes the window.
Sets the operating mode.
Select from among Heat, Cool, Fan, Dry, and Auto.
Confirms the setting.
57