Tenant Holiday/Timer Special Day Screen; Prohibit Remote Control; Screen - Panasonic CZ-256ESMC2 Operation Manual

3-8. Tenant Holiday/Timer Special Day Screen

When you use the menu to select [6. Auxiliary settings : 4. Ten.Ho/TimerSp.Day] while logged in as an
administrator, a screen such as shown below appears.
Tree section "Cancel"/"Send" buttons
You can only configure tenant holiday/timer special day settings one tenant at a time. If you attempt to
switch to Tenant002 settings in the middle of configuring Tenant001 settings, for example, the message
"Send for each tenant." appears.
In such a case, apply or cancel the current settings by clicking the "Send" or "Cancel" button, respectively,
before configuring the next tenant.
To copy changed settings, click the "Send" button and apply the settings before copying.
For details on the settings, refer to the operation manual for the Intelligent Controller.
12
Screen Display and Operation
3-9. Prohibit Remote Control Screen
When you use the menu to select [6. Auxiliary settings : 5. Prohibit R/C] while logged in as an
administrator, or click the "CHECK" button for prohibit remote control in the remote control window, a
screen such as shown below appears. (As non-administrator users can only confirm settings and not
configure them, the "Cancel" and "Send" buttons only appear when logged in as an administrator.)
"Copy" button
For details on the settings, refer to the operation manual for the Intelligent Controller.
Screen Display and Operation
13