Setting Distribution Time Zones; Main; Setting Special Distribution Days - Panasonic CZ-256ESMC2 Operation Manual

6 Using the System

6.8.6 Setting distribution time zones

You can set distribution time zones for the same day of each week.
Procedure
Select 6.Auxiliary settings in the main menu and 6.Distribution time zone in the sub menu.
*When "No Distrib." is selected, this screen is not accessible. (see
1.Zone name
2.ZoneNo./Mng.target
3.Program timer
4.Ten.Ho/TimerSp.Day
5.Prohibit R/C
1.Status/Control 6.Distribution time zone
2.Total data/Cut-off
7.Special distrib. day
3.Distrib. ratio/Usage 8.I/D unit settings
4.Maintenance/Test Run 9.Other settings
5.Initial settings
10.WEB settings
6.Auxiliary settings 11.User settings
2
5
1
1 Select the distribution group.
2 Touch the "From" column.
3 Set the start time of regular hours to a time between 00:00 and 24:00 (30-minute intervals).
4 Touch the Set button to con rm the setting, or the Cancel button to cancel it.
• If you set the start time to 00:00 and the end time to 24:00, the entire day is regular hours.
• If the start time is the same as the end time, the entire day is out of hours.
• If the start time and the end time are reversed, the outer side is regular hours.
5 Touch the "To" column.
6 Set the end time of regular hours to a time between 00:00 and 24:00 (30-minute intervals).
7 Touch the Set or Cancel button.
* Refer also to "6.6.3 Time zone totals and distribution".
62
6 6
6 6
6 Using the System

Main

Sub

6.8.7 Setting special distribution days

5 1
5 1
Main Sub )
3
7
You can set special distribution days to which normal time zone settings do not apply.
Use this function for holidays and so on. Special distribution days can be registered for up to the
next two years.
Procedure
Select 6.Auxiliary settings in the main menu and 7.Special distrib. day in the sub menu.
*When "No Distrib." is selected, this screen is not accessible. (see
1.Zone name
2.ZoneNo./Mng.target
3.Program timer
4.Ten.Ho/TimerSp.Day
5.Prohibit R/C
1.Status/Control 6.Distribution time zone
2.Total data/Cut-off
7.Special distrib. day
3.Distrib. ratio/Usage
8.I/D unit settings
4.Maintenance/Test Run 9.Other settings
5.Initial settings 10.WEB settings
6.Auxiliary settings 11.User settings
3
2
1
1 Select the distribution group to set.
2 Select the calendar for the month of the year to set.
3 On the left-side calendar, touch the date or day to set as a special distribution day.
4 If special distribution days have already been registered for a distribution group, you can copy
them from the calendar to the calendar on the right. Select the distribution group for the copy
destination calendar.
5 A window like the one on the right appears when you touch
Copy .
6 Touch the OK button to copy two years of special
distribution days from the distribution group on the left to the
distribution group on the right.
63
6 7
6 7
Main Sub
5 1
5 1
Main Sub )
4
5