Vfo And A Memory/Bank Scan; Vfo Frequency And A Memory/Bank Scan; Vfo Scan And A Memory/Bank Scan - Icom i2730A Instruction Manual

6
PRIORITY WATCH

■ VFO and a Memory/Bank scan

D VFO frequency and a Memory/Bank scan
Sequentially checks the Memory or Bank channels every
5 seconds, while receiving on a VFO frequency.
Set the VFO frequency. (p. 24)
q
Select the Memory mode. (p. 23)
w
Hold down [V/MHz SCAN]
e
Rotate [DIAL] S to select a desired scan type.
r
Push [V/MHz SCAN]
t
• The Memory scan starts.
Push [MENU
y
• Enters the MENU mode.
u Rotate [DIAL]S to select "PRIO" (Priority scan).
Push [ ï]D.
i
Rotate [DIAL] S to select "ON" or "Bell."
o
• ON: Starts Priority Watch.
• Bell: Starts Priority Watch.
When a signal is received on the Priority channel,
the " " icon appears on the display.
!0 Push [ï]D.
!1 Push [MAIN BAND]S.
• Exits the MENU mode.
• The "PRIO" icon appears, and the Priority watch starts.
• To cancel the Priority watch, select "OFF" in step o.
47
S for 1 second.
S.
]C.
Example: Sequentially checks the Memory channels while re-
ceiving on 433.920 MHz.
Checks the Memory channels every
5 seconds.
D VFO scan and a Memory/Bank scan
Sequentially checks the Memory or Bank channels every 5
seconds during a VFO scan.
Do steps q through !1 as shown to the left.
q
• The "PRIO" icon appears, and the Priority watch starts.
Hold down [V/MHz SCAN]
w
Rotate [DIAL] S to select a desired scan type.
e
Push [V/MHz SCAN]
r S.
• The VFO scan starts.
D isplay
S ide C enter S ide
Appears
The Memory channels are
sequentially checked.
S for 1 second.
The C, S, or D in the
instructions indicate the
area of the controller.
C: Center
S: Side
D: Display