Vox Function; Setting The Vox Level; Using The Vox Function - Icom i2730A Instruction Manual

■ VOX function

The VOX (Voice-Operated Transmission) function toggles the
transceiver between transmit and receive by your voice. This
function provides hands-free operation.
If the transceiver does not connect to a Bluetooth
you cannot use the VOX function, even if the "VOX" item is
set to ON.
You can use the VOX function with the optional VS-3 Blu-
®
etooth headset.
D Using the VOX function
Push [MENU ]C.
q
• Enters the MENU mode.
w Rotate [DIAL]S to select "VOX" (VOX).
( MENU-EXMENU > EXMEN-BT SET > BTSET-HS SET >
HSSET-VOX > VOX-VOX)
ï]D.
Push [
e
• Goes to the next tree level.
Rotate [DIAL] S to select "ON."
r
Push [MAIN BAND]
t S.
• Exits the MENU mode.
D Setting the VOX level
NOTE: We recommend you set the "MIC G" (MIC gain) item
in EXMENU or the headset's microphone gain level, before
setting the "VOX LV" (VOX level) item in EXMENU,
®
headset,
q
w Rotate [DIAL]S to select "VOX LV" (VOX level).
e
r
t
Appears
Bluetooth
Push [MENU ]C.
• Enters the MENU mode.
( MENU-EXMENU > EXMEN-BT SET > BTSET-HS SET >
HSSET-VOX > VOX-VOX LV)
Push [ ï]D.
• Goes to the next tree level.
While speaking into the headset microphone, rotate
[DIAL]S to adjust the VOX level.
• Higher values make the VOX function more sensitive to your
voice.
• Displays "VOX" when the TX level audio is input. In this case, the
transceiver does not transmit.
Push [MAIN BAND]
S.
• Exits the MENU mode.
• If the VOX operation is intermittent, set the "VOX.DLY"
(VOX delay) item in EXMENU to an more stable value.
(p. 17)
• When the VOX function is ON, you can also adjust the
VOX level by rotating [DIAL]S while transmitting.
11
® OPERATION
11
74