Clearing A Memory Channel - Icom i2730A Instruction Manual

4
MEMORY OPERATION

■ Clearing a Memory channel

Entered memory content can be cleared (erased), if desired.
NOTE: Once you clear a memory content, it cannot be re-
covered.
• The operations are for the MAIN band.
Push [MR CALL]
q
S.
• Selects the Memory mode.
• When you clear a Call channel, hold down [MR CALL]S for 1
second to select the Call channel mode.
Push [MW] C to display the Memory entry screen.
w
Rotate [DIAL] to select "CLEAR."
e
S
ï]D.
Push [
r
Rotate [DIAL] to select a desired channel to be cleared.
t
S
ï]D.
Push [
y
• Displays "CLEAR?."
Rotate [DIAL] to select "YES."
u
S
Push [ ï]D.
i
• Beeps sound.
• Clears the memory content.
35
Select
D isplay
S ide C enter S ide
The C, S, or D in the
instructions indicate the
area of the controller.
C: Center
S: Side
D: Display