Transmitting Dsc Calls - Icom IC-M412 Instruction Manual

6
DSC OPERATION
n Transmitting DSC calls
To ensure correct operation of the DSC function, please
make sure you set the squelch correctly. (p. 7)
D Transmitting an Individual call
The Individual call function allows you to transmit a DSC sig-
nal to a specific ship only.
q Push [MENU] to enter the DSC menu.
w Push [Y] or [Z] to select "INDIVIDUAL," then push [ENT].
e Push [Y] or [Z] to select a desired pre-programmed Indi-
vidual address or "MANUAL INPUT," then push [ENT].
• The ID code for the individual can be set in advance. (p. 14)
• When "MANUAL INPUT" is selected, set the 9-digit MMSI ID
code for the individual you wish to call with [Y] or [Z]. (See
About Manual Inputting; p. 22.)
22
About Manual Inputting:
Push [Y] or [Z] to input the 9-digit Individual ID, then
push [ENT].
• Push [CH/WX] or [16] to move the cursor forward or backward,
respectively.
• Push [CLR] to cancel and exit the condition.
• Go to the next step after pushing [ENT].
Push
Scrolls
r Push [Y] or [Z] to select a desired intership channel,
then push [ENT].
• Intership channels are already preset into the transceiver in
preferred order.
• After pushing [ENT], Channel 70 is automatically selected and
"READY" appears at the channel comment indicator.
Push
Scrolls
/