Gat_|_ - Kenmore 385.16677 Owner's Manual

Removing the Presser Foot f _'
1. Turn off the power switch and unplug the
machine.
2. Raise the needle and the presser foot.
3. Press the lever located on the back of the foot
holder. The presser foot will drop off.
(_ Needle
(_ Presser foot lifter
(_ Foot holder
(_ Lever
Attaching the Presser Foot
1. Turn off the power switch and unplug the
machine.
2. Place the presser foot so that the pin on the
lies just under the groove of the foot holder.
3. Lower the foot holder to lock the fo_ i_ RJace.
4. Raise the presser foot lifter to: i_at :_
presserfoot is secure.
(_Groove .......
2_ Pin ................... ............................
® ,ever .......
It is presser foot's
pressure for normal sewing.
When you serge heavy or lightweight fabrics, turn
the adjusting screw:
-- clockwise for heavyweight fabric.
-- counterclockwise for lightweight fabric.
* For normal sewing, set the adjusting screw so
that it sits 1ram below the top of the machine.
(_ To decrease
(_) To increase
(_ Adjusting screw
Top of the machine
®
.... :
®
®
@
14