Guide Bar; Gat_|_ - Kenmore 385.16677 Owner's Manual

The Position of Thread Guide Bar
1. Pull the thread guide bar up as far as it will go.
2. Turn the thread guide bar so that the thread
guides are right above the spool pins.
(_ Thread guide bar
(_ Thread guide
(_ Stoppers
(_ Spool pin
* Make sure to lock the thread guide of the guide
pole in the correct position with the two stoppers.
Attaching the Spool Holder Cap and Net
1. When you use a small thread
spool holder from the spool I ............................................
spool with its slit side up,
cap on top of it.
@ Spool ....
@
Spool
Spool 8 i8_:_cap ..... .....
(_ Slit
J
2. If the thread slips down from the spool during
threading and/or sewing, put a net on the spool as
illustrated to prevent jamming.
* The spool holder cap is an optional accessory.
(_) Net
(_ Spool pin
10
2
\
£
t
@