Error Code Messages - Ex2 - Lexmark W840 Service Manual

4024-XXX

Error code messages - EX2

Error code or
message
203.00
Paper jam
Check area A
203.01
Paper jam
Check areas A,
E
203.02
Paper jam
Check area A
203.03
Paper jam
Check areas A,
E
230.00
Paper jam
Check areas A,
E
919.00
Service std
bin 2
919.01
Service std
bin 2
Close door E
2-92
Options Service Manual
Error Contents
Sensor (exit 2) on jam
Sensor (exit 2) off jam
Sensor (exit 2) on jam in
standard bin or simplex finisher
Sensor (exit 2) static jam
Sensor (duplex wait) on jam
Sensor (exit 2 media shift HP)
failure
Exit 2 unit assembly
connection failure
Exit 2 left door assembly open
Description/Action
The sensor (exit 2) is not turned on within the specified
time after the sensor (fuser exit) is turned on.
Go to "203.00 Sensor (exit 2) on jam" on page
The sensor (exit 2) is not turned off within the specified
time after the sensor (exit 2) is turned on.
Go to "203.01 Sensor (exit 2) off jam" on page
The sensor (exit 2) was turned on when the media is
delivered to the exit 1 standard bin or simplex finisher.
Go to "203.02 Sensor (exit 2) on jam in standard bin
or finisher" on page 2-96.
Media remains on the sensor (exit 2).
Go to "203.03 Sensor (exit 2) static jam" on
page 2-97.
The sensor (duplex wait) is not turned on within the
specified time after the exit 2 drive motor is turned on.
Go to "230.00 Sensor (duplex wait) on jam" on
page 2-98.
The sensor (exit 2 media shift HP) is not turned on within
the specified time after the media shift motor is turned
on.
Go to "919.00 Sensor (exit 2 media shift HP) failure"
on page 2-99.
Exit 2 unit assembly connection is missing or damaged.
Go to "919.01 Exit 2 unit assembly connection
failure" on page 2-100.
The exit 2 left door is open.
Go to "Exit 2 left door assembly open" on
page 2-101.
2-93.
2-94.