Exit 2 Unit Assembly Connection Failure - Lexmark W840 Service Manual

4024-XXX
Step
3 Check the media shift motor for proper operation.
1. Enter Diagnostics mode.
2. Select MOTOR TESTS.
3. Select Exit2 shift mtr.
Does the above motor rotate properly?
4 Check the media shift motor for proper connection.
Is the above motor connected properly?
5 Perform a print test.
Does the error still occur?
6 Perform a print test.
Does the error still occur?

919.01 Exit 2 unit assembly connection failure

Step
1 Check the exit 2 unit assembly for proper installation.
Is the exit 2 unit assembly installed properly?
2 Check the exit 2 unit assembly connector.
Is the exit 2 unit assembly connector or the connector
attached to the printer damaged?
3 Perform a print test.
Does the error still occur?
4 Perform a print test.
Does the error still occur?
2-100
Options Service Manual
Check
Check
Yes
Go to step 5. Go to step 4.
Replace the media Replace the
shift motor. connection.
Go to "Exit 2 unit
assembly removal"
on page 4-192.
Replace the exit Problem solved.
interface card
assembly.
Refer to the Printer
Service Manual.
Go to step 6.
Replace the printer Problem solved.
engine card
assembly.
Refer to the Printer
Service Manual.
Yes
Go to step 2. Reinstall the exit 2
unit assembly, and
POR.
Go to Go to
unit assembly
removal" on
page
Replace the exit 2 Go to step 3.
unit assembly or
damaged connector.
Go to Go to "Exit 2
unit assembly
removal" on
page 4-192.
Replace the exit Problem solved.
interface card
assembly.
Refer to the Printer
Service Manual.
Go to step 4.
Replace the printer Problem solved.
engine card
assembly.
Refer to the Printer
Service Manual.
No
No
"Exit 2
4-192.