Error Code Messages - Dup - Lexmark W840 Service Manual

Error code messages - DUP

Error code or
message
230.00
Paper jam
Check areas A,
E
230.01
Paper jam
Check area D
231.00
Paper jam
Jam in A, D
231.01
Check areas
A, D
980.04
Service duplex
comm.
997.00
Service wrong
duplex
Close door D
Error Contents
Sensor (duplex wait) on jam
Sensor (duplex wait) static jam
Sensor (registration) on jam
(duplex paper feed)
Sensor (registration) on jam
(duplex paper feed)
Duplex controller card
assembly communication
failure.
Duplex controller card
assembly type failure
Duplex left door assembly
open
Description/Action
The sensor (duplex wait) is not turned on within the
specified time after the exit 2 drive motor is turned on.
Go to "230.00 Sensor (duplex wait) on jam" on
page 2-84.
Paper remains on the sensor (duplex wait).
Go to "230.01 Sensor (duplex wait) static jam" on
page 2-85.
Sensor (registration) is not turned on within the specified
time after the duplex drive motor is on.
Go to "231.00 Sensor (registration) on jam (duplex
paper feed)" on page 2-86.
Sensor (registration) is not turned on within the specified
time after the sensor (duplex wait) is turned on.
Go to "231.01 Sensor (registration) on jam (duplex
paper feed)" on page 2-87.
A communication error occurred between the printer
engine card assembly and the duplex controller card
assembly.
Go to "980.04 Duplex controller card assembly
communication failure" on page
A duplex controller card assembly of a different
specification is installed.
Go to "997.00 Duplex controller card assembly type
failure" on page 2-90.
The duplex left door is open.
Go to "Duplex left door assembly open" on
page 2-90.
4024-XXX
2-89.
2-83
Diagnostic information