Exit Deflector And Bin-Full/Narrow Media Sensor Flag Removal - Lexmark C540n Service Manual

5025-2xx, 4xx

Exit deflector and bin-full/narrow media sensor flag removal

See
"Exit deflector and bin-full/narrow media sensor flag" on page 7-5
The exit deflector and bin-full/narrow media sensor flag are in the same FRU and should be replaced together.
Open the front cover.
1.
2. Press upward on the tab (A) to unsnap the bin-full/narrow media sensor flag, and remove the flag.
Note: Be careful to not dislodge the sensor.
3. Remove the exit deflector ground screw (B), and remove the cable from the retainers.
Note: Note the routing of the cable through the retainers for reinstallation.
Service Manual
4-30
for the part number.
Previous
Next
Go Back