Tools Required For Service - Lexmark C540n Service Manual

5025-2xx, 4xx
Previous

Tools required for service

Flat-blade screwdrivers, various sizes
#1 Phillips screwdriver, magnetic
#2 Phillips screwdriver, magnetic
Next
#2 Phillips screwdriver, magnetic short-blade
Long-shank Phillips screwdriver at least 8 in. or 200 mm long, preferably magnetized
7/32 inch (5.5 mm) open-end wrench
Go Back
7.0 mm nut driver
Needlenose pliers
Diagonal side cutters
Spring hook
Feeler gauges
Analog or digital multimeter
Parallel wrap plug 1319128
Twinax/serial debug cable 1381963
Coax/serial debug cable 1381964
Flashlight (optional)
General information
1-15