Installation Overview - Bosch MIC Series 550 Classic Installation And User Manual

MIC Series 550 Classic Camera
4

Installation Overview

CAUTION!
Installation should be made by qualified service personnel and conform to the National
Electrical Code and applicable local codes.
The MIC Series cameras are designed for easy installation on a variety of common fittings. The
most common type of mount used is a dedicated CCTV camera pole where the camera is
bolted directly to the top using industry-standard 4 in. (101.6 mm) fitting. This type of camera
pole provides a robust mounting platform that minimizes camera motion and typically has a
large base cabinet for mounting ancillary equipment such as power supplies.
The camera can also be mounted on lamp post columns using the Pole Mount Bracket (MIC-
PMB); however, users should be aware that lamp posts can often be subject to movement and
are not suitable platforms in all conditions or for all applications.
For mounting directly onto buildings, Bosch Security Systems manufactures a range of
brackets suitable for all typical building installations for upright (90°), Inverted, or canted
(45°) positions.
Figure 4.1
The camera's adaptability enables easy integration in a wide variety of mobile and re-
deployable installations. These have included lifeboats and other surface/subsurface vessels,
emergency service vehicles, highway agency vehicles, council/contractor parking enforcement
vehicles, and crowd-control vehicles.
Bosch Security Systems, Inc.
MIC camera mounting positions: Inverted, Upright, and Canted
Installation and User Manual
Installation Overview | en
F.01U.276.622 | 1.0 | 2012.09
13