Table of Contents
Advertisement
MIC Series 550
5
Overview of Installation Steps
Caution!
Installation must be made by qualified personnel and conform to ANSI/NFPA 70 (the National
!
Electrical Code
and all applicable local codes. Bosch Security Systems, Inc. accepts no liability for any
damages or losses caused by incorrect or improper installation.
To install your MIC camera, follow these steps in sequence.
Note: Depending on your model of camera, your desired mounting location and orientation, as
well as your mounting brackets and chosen camera accessories, you may not need to
complete every step.
Caution!
ELECTRIC SHOCK HAZARD
!
To reduce the risk of electric shock, disconnect power to the camera and/or to the power
supply unit before moving the camera, before installing any accessories, and before mounting
the camera.
1. Select the Mounting Location and Orientation, page 18.
2. Install the MIC (standard) PSU , page 28 (sold separately). Refer to the Installation Manual
for MIC Series Power Supplies for installation instructions.
3. Install metal conduit (user-supplied) to the DCA (sold separately) (and to the PSU if
necessary), install wiring (user-supplied), and then make the necessary connections for
power, telemetry, and video.
4. Reverse the Rain Shield for Inverted Operation, page 27 (for cameras mounted in inverted
position).
6. Mount the Camera, page 22.
7. (Optional) Cant the Camera, page 25.
8. Connect the camera to the computer.
Bosch Security Systems, Inc.
(NEC)), Canadian Electrical Code, Part I (also called CE Code or CSA C22.1),
®
Operation Manual
Overview of Installation Steps | en
2014.11 | 3.2 | F.01U.239.454
17
Advertisement
Table of Contents
