Powering On Controlling the Camera 6.3.1 Navigating the On-Screen Display (OSD) Menus 6.3.2 Basic Keyboard Operation 6.3.3 Keyboard Commands, Bosch Protocol 6.3.4 Keyboard Commands, Pelco Protocol 6.3.5 Special Preset Commands, Pelco Protocol Setting the Camera Address via FastAddress 6.4.1 FastAddress, Bosch Protocol 6.4.2...
Page 4
MIC Series 550 Camera Setting Passwords 6.5.1 Special Passwords 6.5.2 Setting Passwords, Bosch Protocol Configuring the Camera for Inverted Operation On-Screen Display (OSD) Menus (Bosch Protocol) Camera Setup Menu Lens Setup Menu PTZ Setup Menu Display Setup Menu Communication Setup Menu Alarm Setup...
Legal Information Copyright This user manual is the intellectual property of Bosch Security Systems, Inc. and is protected by copyright. All rights reserved. Trademarks All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.
The power supplies have an IP65 rating and are suitable for outside installation; however, for security reasons, Bosch recommends that they are installed in a suitable equipment cabinet. The camera unit is sealed to IP68 and can be used safely in damp environments or outdoors, as long as the base cable connector is suitably sealed.
13. Attachments, changes or modifications - Only use attachments/accessories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warranty or, in the case of an authorization agreement, authority to operate the equipment.
Page 8
(Aux ON 911) or a power cycle before usable video is available. Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material.
Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of lost digital information, Bosch Security Systems recommends multiple, redundant recording systems, and a procedure to back up all analog and digital information.
60950-1. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product. UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING- RELATED FUNCTIONS OF THIS PRODUCT. F.01U.239.454 | 1.0 | 2011.04 Installation Manual Bosch Security Systems, Inc.
MIC Series 550 Camera Safety | en Customer Support and Service If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. Service Centers Telephone: 800-366-2283 or 585-340-4162 Fax: 800-366-1329 Email: cctv.repair@us.bosch.com...
MIC Series 550 Camera Nebar gasket Additional Tools Required The following table lists additional tools required (not supplied by Bosch): Quantity Part 13 mm wrench for the PCD foot, fixing bolts 3 mm screwdriver for the terminal blocks in power supply 8 mm screwdriver for fixing screws for MIC Series PSU enclosure No.
PMB); however, users should be aware that lamp posts can often be subject to movement and are not suitable platforms in all conditions or for all applications. For mounting directly onto buildings, Bosch Security Systems manufactures a range of brackets suitable for all typical building installations for upright (90°), Inverted, or canted (45°) positions.
Wall Mount Bracket Securing bolts for Wall Mount Bracket Figure 4.3 Typical wall mount (from left to right: Wall Mount Bracket (MIC-WMB), Shallow Conduit Adapter (MIC-SCA), and Spreader Plate (MIC-SPR)) F.01U.239.454 | 1.0 | 2011.04 Installation Manual Bosch Security Systems, Inc.
5 = inverted on top of pole) Number Description Correct way, Upright Correct way, Inverted Correct way, Canted Incorrect way, inverted and canted Incorrect way, inverted on top of pole Bosch Security Systems, Inc. Installation Manual F.01U.239.454 | 1.0 | 2011.04...
Locate and remove the two (2) pan body fixing screws (identified by arrows in Figure 5.2 below). Once the screws have been loosened, lift them up and continue turning to lock the screws open. Ensure not to damage the paint work on the camera. F.01U.239.454 | 1.0 | 2011.04 Installation Manual Bosch Security Systems, Inc.
The upright unit can be mounted with the camera ball up or down. When the camera will be in inverted position, you should reverse the rain shield to provide weather protection for the window glass. Figure 5.5 Rain shield Bosch Security Systems, Inc. Installation Manual F.01U.239.454 | 1.0 | 2011.04...
Fit the mounting brackets securely, observing all appropriate safety precautions and local building regulations. Carefully lift the camera to the mounting point. F.01U.239.454 | 1.0 | 2011.04 Installation Manual Bosch Security Systems, Inc.
Additionally, an earth bonding connection to the case provides protection against damage from secondary strikes. Bosch Security Systems, Inc. Installation Manual F.01U.239.454 | 1.0 | 2011.04...
The composite cable has no termination (free wires) at the other end for wiring into the power supply. The standard color coding used in these cables is as follows: F.01U.239.454 | 1.0 | 2011.04 Installation Manual Bosch Security Systems, Inc.