Diagnostics Menu - Bosch MIC Series 550 Classic Installation And User Manual

Hide thumbs Also See for MIC Series 550 Classic:

User manual (74 pages)

Installation and user manual (20 pages)

Installation manual (8 pages)

Table Of Contents

Table of Contents

en | On-Screen Display (OSD) Menus (Bosch Protocol)

Selecting a Rule number provides access to its configuration menu. The Rule # Menu allows

you to configure a rule from previously-defined alarm inputs and outputs. Once an alarm is

configured with valid inputs and outputs, it can be turned on or off (enabled or disabled)

through its configuration menu.

Rule # Choices:

Enabled

Turns the rule on or off after its inputs and outputs have been defined.

YES to enable or NO to disable (default setting)

Input

Toggles through a list of valid inputs set in the Alarm I/O Setup > Inputs Setup Menu that

define the rule's inputs. A rule can have up to four (4) inputs.

Ilnputs which were set in the Inputs Setup Menu include Aux On/Off (1-64), Shot, and NONE

(default setting).

Output

Toggles through a list of valid outputs set in the Alarm I/O Setup > Outputs Setup Menu that

defines a rule's outputs.

Outputs set in the Outputs Setup Menu include Alarm Relay, Aux On/Off (1-64), Shot, OSD,

Transmit, and NONE (default setting).

Some outputs, such as Alarm Outputs 1-3, Alarm Relay, and Aux On/Off can be set to be

active for a specific duration of time as follows:

Seconds: 1-5, 10, 15, or 30

Minutes: 1-5 or 10

Latched: The alarm stays active until acknowledged.

Follows: The alarm follows the alarm rule.

Default setting: NONE

NOTICE!

You can include up to four (4) Input and Output events in a single rule. Each input and output,

however, must be true for the alarm's rule to be valid and enabled.

7.7