Basic Keyboard Operation; Keyboard Commands, Bosch Protocol - Bosch MIC Series 550 Classic Installation And User Manual

24 en | Getting Started
1.
2.
3.
Note: To select the Exit Menu item from anywhere in the current menu, use the Zoom
command.
6.3.2

Basic Keyboard Operation

The following tables summarize the basic operations for a standard keyboard and the
functions available to control a MIC550 Classic camera.
Typical Keyboard
Features
Function Keys
Number Keys
Camera Key
Enter Key
Focus Key
Iris Key
Key LEDs
LCD
Joystick
Table 6.1 Typical Keyboard Functions
Camera Operation
To Pan Side to Side
To Tilt Up and Down Move the joystick forward and back.
To Zoom In
To Zoom Out
Table 6.2 Typical Keyboard Controls for a MIC-550 Camera
6.3.3

Keyboard Commands, Bosch Protocol

Keyboard control commands are composed of a sequence of three (3) inputs with the
following convention: 1) a Function key + 2) a Command number key(s) + 3) the Enter key.
–
NOTICE!
The convention used for control key commands in this manual is ON, OFF, SET, and SHOT.
Refer to your keyboard manual for the key naming conventions.
–
–
For example, the keyboard command to make the camera pan 360° continuously is:
ON-1-ENTER (Press the ON key, then press the number 1 key, and then press ENTER.)
F.01U.276.622 | 1.0 | 2012.09
Use the joystick to highlight a menu item.
Press either the Focus or the Iris key to open a menu item.
Follow the on-screen instructions.
Usage
Selects a specific control setting.
Inputs a number from 0 to 9.
Selects a camera number.
Inputs a selection.
Sets the lens focus or makes a menu selection in OSD mode.
Sets the lens iris setting or makes a menu selection in OSD mode.
Indicates an active key.
Displays the current status.
Controls the pan/tilt/zoom (PTZ) functions of the camera.
How to control
Move the joystick left or right.
Twist the joystick clockwise.
Twist the joystick counterclockwise.
Depending on the type of keyboard, the control function keys are labeled:
ON or AUX ON
OFF or AUX OFF
SET or SET SHOT
SHOT or SHOW SHOT
Command numbers range from 1 to 999. See Section A Keyboard Commands by Number,
page 50 for a complete list of keyboard commands.
The Enter key can also be labeled with the ∞ symbol.
Installation and User Manual
MIC Series 550 Classic Camera
Bosch Security Systems, Inc.