Maintenance - Saeco Energica Operating Instructions Manual

30

MAINTENANCE

BREW GROUP CLEANING CYCLE
To wash the Brew Group, simply clean with water as shown on page 38. This wash completes the maintenance process of the Brew Group. We
recommend that you carry out this cycle on a monthly basis or every 500 coff ee brewings by using the Saeco tablets, which can be purchased
separately at your local dealer, at the Philips on-line shop at http://shop.philips.com or at authorised service centres.
WASH CYCLES CANNOT BE STOPPED.
DO NOT LEAVE THE MACHINE UNATTENDED DURING THIS OPERATION.
MENU -> MACHINE MENU -> MAINTENANCE
1
MAINTENANCE
COUNTERS
BREW GROUP CLEAN
CARAFE CLEANING
Select the menu option.
Press the "OK" button to confi rm.
4
Insert the cleaning tablet into the bypass
doser.
7
PLACE A CONTAINER
UNDER THE
DISPENSING SPOUT
OK
After placing the container, press the
"OK" button.
Clean the brew group as described in the "Brew Group Cleaning" section (see page 38).
2
PERFORM BREW
GROUP CLEANING?
OK ESC
Press the "OK" button to confi rm.
5
INSERT GROUP
CLEAN TAB
OK
After inserting the tablet, press the "OK"
button.
8
BREW GROUP CLEAN
The cleaning cycle for the brew group is
performed automatically.
3
REFILL
WATER TANK
OK
Fill the water tank with fresh drinking
water up to the MAX level. Then, press
the "OK" button.
6
Place a container under the coff ee
dispensing spout.
9
At the end of the cycle, remove the
container and empty it appropriately.