Saeco Energica Operating Instructions Manual page 40

10
C
A
D
B
At this stage the carafe holes (A) are
lower than the couplings (C).
The carafe pins (B) are located at the
same height of the guides (D).
12
E
The carafe will be naturally back in
place.
15
CARAFE CLEANING
The cleaning cycle is activated.
The bar shows the cycle progress.
18
Place a large empty container under the
dispensing spout. Rotate the upper part of
the milk carafe directly above the container.
11
B
Insert the carafe by turning it towards the base through a round movement (as shown
in the fi gure), until it is hooked to the hole (E) located in the drip tray.
13
Place a large empty container under the
dispensing spout. Rotate the upper part of
the milk carafe directly above the container.
16
REFILL
WATER TANK
OK
When the wash is complete, fi ll the
tank with fresh drinking water up to the
"MAX" level.
Press the "OK" button to confi rm.
19
CARAFE RINSING
The rinse cycle is activated. The bar shows the cycle progress.
At the end of the cycle, the machine returns to the product brew menu page.
14
POUR DETERGENT
INTO CARAFE & FILL
WITH WATER
OK
Press the "OK" button to confi rm.
17
FILL CARAFE
WITH FRESH WATER
OK
Remove the carafe, rinse and fi ll it again
with fresh drinking water up to the
"MAX" level.
Press the "OK" button to confi rm.
Upon completion of the cleaning
cycle, we recommend rinsing all the
components under fresh drinking water.
35