Saeco Energica Operating Instructions Manual page 36

BOILER DESCALING CYCLE MENU
A descaling cycle is necessary when indicated by the machine. The machine must be on and controls the distribution of the descaling
solution automatically. This operation must be carried out before your coff ee machine stops working properly, as in this case repair is not
covered by warranty. The descaling solution and the complete "Maintenance Kit" can be purchased at your local dealer, at the Philips on-
line shop at http://shop.philips.com or at authorised service centres.
In case of confl ict, priority must be given to what is indicated in the operation and maintenance manual over the
instructions provided on separately sold accessories and materials.
DO NOT LEAVE THE MACHINE UNATTENDED DURING THIS OPERATION.
WARNING! NEVER USE VINEGAR AS A DESCALING SOLUTION.
Only use the Saeco descaling solution, especially designed to respect the technical features of the machine, to ensure its performance
will not decrease with time, and for a safe and risk-free use. The descaling solution is to be disposed of according to the manufacturer's
instructions and/or regulations in force in the country of use.
Note: Before starting a descaling cycle make sure that:
1. THE INTENZA WATER FILTER HAS BEEN REMOVED
2. A container of adequate size or a couple of containers are available and are placed in the points identifi ed
DESCALING AND/OR RINSE CYCLES CANNOT BE STOPPED; ALL THE PHASES MUST BE COMPLETED. IF THE MACHINE IS
SWITCHED OFF OR IN CASE OF POWER FAILURES, THE INTERRUPTED CYCLE MUST BE REPEATED FROM THE BEGINNING.
HOWEVER, CYCLES MAY BE PAUSED BY PRESSING THE "PAUSE" BUTTON; IT WILL BE POSSIBLE TO RESUME THE CYCLE AT
ANY TIME BY PRESSING THE "START" BUTTON.
MENU -> MACHINE MENU -> MAINTENANCE
Note: During the descaling cycle, some alarm messages may appear to allow for a correct management of the machine.
After resetting the message, always press the "START" button to resume the descaling cycle.
1
MAINTENANCE
CARAFE CLEANING
DESCALING
CARAFE CLEAN
Select the "DESCALING" option from the
menu.
Press the "OK" button to confi rm.
2
START DESCALING?
OK ESC
Warning: Once this selection is made, the
whole cycle will have to be completed.
Press the "OK" button to confi rm or "ESC"
to exit
3
FILL TANK WITH
DESCALING SOLUTION
OK
Pour the entire content of the Saeco
concentrated descaling solution into the
water tank, and then fi ll the tank with
fresh water up to the MAX level.
Then, press the "OK" button.
31