Saeco Adapting System; Stand-By - Saeco Energica Operating Instructions Manual

SAECO ADAPTING SYSTEM

Coff ee is a natural product and its characteristics may change according to its origin, blend and roast. The Saeco coff ee machine is equipped
with a self-adjusting system that allows the use of all types of coff ee beans available on the market (not including fl avored or carmelized).
• The machine automatically adjusts itself in order to optimize the extraction of the coff ee, ensuring perfect compression of the beans to
obtain a creamy espresso coff ee that is able to release all the aromas, regardless of the type of coff ee used.
• The optimization process is a learning process that requires the brewing of a certain number of coff ees to allow the machine to adjust the
compactness of the ground coff ee.
• Attention should be given to special blends, which require grinder adjustments in order to optimize the extraction of the coff ee.
STAND-BY MODE
The machine is designed for energy saving. After 30 minutes of inactivity, the machine goes into stand-by mode, the boiler is no longer
heated and all the devices turn off .
Power consumption is reduced to a minimum. Press any button to turn the machine on again.
The machine status can be manually changed to stand-by mode by holding the stand-by button pressed for 3 seconds.
Note:
1 The stand-by mode cannot be activated if the service door is left open.
2 The stand-by activation time can be changed in the "MACHINE MENU" on
page 26.
3 When the stand-by mode is activated, the machine performs a rinse
cycle of the internal circuits, if necessary. The cycle can be interrupted by
pressing the "STOP" button.
The machine can be turned on again by executing one of the following actions:
1 By pressing any of the control panel buttons.
2 By opening the service door (when closing the door the machine goes back to stand-
by mode).
A
The red light fl ashes when the machine
is in stand-by mode.
11