Saeco Energica Operating Instructions Manual page 33

28
MACHINE MENU
WATER MENU
WATER MENU
HARDNESS
ENABLE FILTER
ACTIVATE FILTER
This menu allows setting correct water parameters for coff ee brewing.
To change the machine water hardness setting.
The "Hardness" function allows adjusting the machine to the level of
hardness of the water used. The machine will then request descaling at the
right moment.
Measure water hardness as shown on page 5.
To activate/deactivate the warning signal to replace the water fi lter. By
activating this function, the machine notifi es the user when the water fi lter
needs to be replaced.
OFF: Warning disabled.
ON: Warning enabled (this value is automatically set when the fi lter is
activated).
To activate the fi lter after its installation or replacement. Refer to the relevant
section on page 7 to correctly install and/or replace the fi lter.