Installation; Starting The Machine - Saeco Energica Operating Instructions Manual

4

INSTALLATION

STARTING THE MACHINE

Before turning on the machine, make sure that the power button is set to "0".
1
Lift the right outer lid and remove the
inner lid.
4
Remove the water tank using the handle.
7
Press the power button to the "I"
position to turn the machine on.
At fi rst start-up only, the screen (1) will be displayed as shown on page 5.
Then, the language can be set from the relevant menu only (see page 25).
2
Slowly pour coff ee beans into the
hopper.
Replace the inner lid and close the outer
lid.
5
Fill the tank with fresh drinking water. Do
not exceed the "max" level indicated on
the water tank. Place the water tank back
into the machine.
8
The display shows a red blinking light.
Press any button to start the machine.
3
Lift the left outer lid and remove the
inner lid.
6
Insert the plug into the socket located
on the back of the machine and insert
the other end into a power outlet with
suitable current.
When the correct temperature is
reached, the machine performs a
priming and rinsing cycle of the
internal circuits. A small amount of
water is dispensed. Wait for this cycle
to be completed.
The screen for product dispensing
appears on the display; see page 3.