Yamaha FZS1000N Service Manual page 95

CHANGING THE COOLANT
CAUTION:
S Adding water instead of coolant lowers the
antifreeze content of the coolant. If water is
used instead of coolant, check, and if nec-
essary, correct the antifreeze concentra-
tion of the coolant.
S Use only distilled water. Soft water may be
used if distilled water is not available.
S If coolant comes into contact with painted
surfaces, immediately wash them with wa-
ter.
S Do not mix different types of antifreeze.
11. Install:
S radiator cap
12. Fill:
S coolant reservoir
(with the recommended coolant to the maxi-
mum level mark a )
13. Install:
S coolant reservoir cap
14. Start the engine, warm it up for several min-
utes, and then turn it off.
15. Check:
S coolant level
Refer to "CHECKING THE COOLANT LEV-
EL".
NOTE:
Before checking the coolant level, wait a few
minutes until it settles.
16. Install:
S rear suspension
Refer to "REAR SHOCK ABSORBER AS-
SEMBLY" in chapter 4.
S fuel tank
S seat
3-32
CHK
ADJ