Yamaha FZS1000N Service Manual page 69

ADJUSTING THE VALVE CLEARANCE
3-6
A Front
d. For each cylinder, starting with cylinder #1 at
TDC, turn the crankshaft clockwise as speci-
fied in the following table.
B Degrees that the crankshaft is turned clockwise
C Cylinder
D Combustion cycle
#2 Cylinder
#4 Cylinder
#3 Cylilnder
3. Remove:
S intake camshaft
S exhaust camshaft
NOTE:
S Refer to "REMOVING THE CAMSHAFTS" in
chapter 5.
S When removing the timing chain and cam-
shafts, fasten a wire to the timing chain to re-
trieve it if it falls into the crankcase.
4. Adjust:
S valve clearance
a. Remove the valve lifter 1 and the valve pad
2 with a valve lapper 3 .
CHK
ADJ
180_
360_
540_