PICKUP COIL
REMOVING THE PICKUP COIL ROTOR
1. Remove:
R pickup coil lead holder 1
R pickup coil rotor cover 2
NOTE:
Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern.
After all of the bolts are fully loosened, remove
them.
2. Remove:
R pickup coil rotor bolt 1
R washer
R pickup coil rotor 2
NOTE:
While holding the generator rotor 3 with the
universal magneto & rotor holder 4 , loosen the
pickup coil rotor bolt.
Universal magneto & rotor holder
YU-01235
INSTALLING THE PICKUP COIL ROTOR
1. Install:
R pickup coil rotor 1
R washer
R pickup coil rotor bolt
NOTE:
When installing the pickup coil rotor, align the
pin 2 in the crankshaft sprocket with the groove
a in the pickup coil rotor.
5-34
ENG