ZyXEL Communications ZyWall 35 User Manual page 313

Table 104 Port Triggering
LABEL
Trigger
Start Port
End Port
Apply
Reset
Chapter 17 Network Address Translation (NAT)
DESCRIPTION
The trigger port is a port (or a range of ports) that causes (or triggers) the ZyWALL to
record the IP address of the LAN computer that sent the traffic to a server on the WAN.
Type a port number or the starting port number in a range of port numbers.
Type a port number or the ending port number in a range of port numbers.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
ZyWALL 35 User's Guide
311