Syslog Logging; Figure 315 Examples Of Error And Information Messages; Figure 316 Menu 24.3.2: System Maintenance: Syslog Logging; Table 199 System Maintenance Menu Syslog Parameters - ZyXEL Communications ZyWall 35 User Manual

ZyWALL 35 User's Guide

Figure 315 Examples of Error and Information Messages

52 Thu Jul
53 Thu Jul
54 Thu Jul
55 Thu Jul
57 Thu Jul
58 Thu Jul
59 Thu Jul
60 Thu Jul
61 Thu Jul
62 Thu Jul
63 Thu Jul
Clear Error Log (y/n):

39.4.2 Syslog Logging

The ZyWALL uses the syslog facility to log the CDR (Call Detail Record) and system
messages to a syslog server. Syslog and accounting can be configured in Menu 24.3.2 -
System Maintenance - Syslog Logging, as shown next.

Figure 316 Menu 24.3.2: System Maintenance: Syslog Logging

You need to configure the syslog parameters described in the following table to activate syslog
then choose what you want to log.

Table 199 System Maintenance Menu Syslog Parameters

FIELD
Syslog:
Active
Syslog Server IP
Address
Log Facility
When finished configuring this screen, press [ENTER] to confirm or [ESC] to cancel.
514
1 05:54:53 2004 PP05
1 05:54:53 2004 PINI
1 05:54:56 2004 PP05 -WARN
1 05:54:56 2004 PP0d
1 05:54:56 2004 PP0d
1 05:54:56 2004 PINI
1 05:54:56 2004 PINI
1 05:55:26 2004 PSSV -WARN
1 05:56:56 2004 PINI
1 07:50:58 2004 PINI
1 07:53:28 2004 PINI
Menu 24.3.2 - System Maintenance - Syslog Logging
Syslog:
Active= No
Syslog Server IP Address= 0.0.0.0
Log Facility= Local 1
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] and then [ENTER] to turn syslog on or off.
Enter the server name or IP address of the syslog server that will log the selected
categories of logs.
Press [SPACE BAR] and then [ENTER] to select a location. The log facility allows
you to log the messages to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
ERROR Wireless LAN init fail, code=15
INFO Channel 0 ok
SNMP TRAP 3: interface 3: link up
INFO LAN promiscuous mode <0>
INFO LAN promiscuous mode <1>
INFO Last errorlog repeat 1 Times
INFO main: init completed
SNMP TRAP 0: cold start
INFO SMT Session Begin
INFO SMT Session End
INFO SMT Session Begin
Chapter 39 System Information & Diagnosis