Configuring Port Forwarding; Figure 149 Port Translation Example - ZyXEL Communications ZyWall 35 User Manual

Figure 149 Port Translation Example

17.6 Configuring Port Forwarding

Note: If you do not assign a Default Server IP address, the ZyWALL discards all
packets received for ports that are not specified here or in the remote
management setup.
Click NAT and Port Forwarding to open the Port Forwarding screen.
Refer to Figure 102 on page 305
Note: The last port forwarding rule is reserved for Roadrunner services. The rule is
activated only when you set the WAN Encapsulation to Ethernet and the
Service Type to something other than Standard.
Chapter 17 Network Address Translation (NAT)
for port numbers commonly used for particular services.
ZyWALL 35 User's Guide
307