Syslog Logging; Figure 203 Examples Of Error And Information Messages; Figure 204 Menu 24.3.2: System Maintenance - Unix Syslog; Table 120 Menu 24.3.2: System Maintenance - Unix Syslog - ZyXEL Communications P-793H User Manual

P-793H User's Guide

Figure 203 Examples of Error and Information Messages

34 Sat Jan
35 Sat Jan
36 Sat Jan
37 Sat Jan
38 Sat Jan
39 Sat Jan
40 Sat Jan
41 Sat Jan
42 Sat Jan
43 Sat Jan
44 Sat Jan
45 Sat Jan
46 Sat Jan
47 Sat Jan
48 Sat Jan
49 Sat Jan
51 Sat Jan
52 Sat Jan
53 Sat Jan
Clear Error Log (y/n):

33.4.2 Syslog Logging

The ZyXEL Device uses the syslog facility to log the CDR (Call Detail Record) and system
messages to a syslog server. Syslog and accounting can be configured in Menu 24.3.2 -
System Maintenance - Syslog Logging, as shown next.

Figure 204 Menu 24.3.2: System Maintenance - UNIX Syslog

You need to configure the syslog parameters described in the following table to activate syslog
then choose what you want to log.

Table 120 Menu 24.3.2: System Maintenance - UNIX Syslog

FIELD
UNIX Syslog:
Active
Syslog IP Address
322
1 00:00:02 2000 PP05 -WARN
1 00:00:04 2000 PP00
1 00:00:06 2000 PP0c
1 00:00:06 2000 PP00 -WARN
1 00:00:06 2000 PP00
1 00:00:06 2000 PP00
1 00:00:06 2000 PP18
1 00:00:06 2000 PP19
1 00:00:06 2000 PP06
1 04:10:22 2000 PP0c
1 04:10:42 2000 PP10
1 04:10:42 2000 PP10
1 04:10:42 2000 PP00
1 04:10:44 2000 PP0c
1 04:46:08 2000 PP00
1 04:46:08 2000 PP00
1 04:46:59 2000 PP0c
1 04:58:00 2000 PP10
1 04:58:00 2000 PP10
Menu 24.3.2 - System Maintenance - UNIX Syslog
UNIX Syslog:
Active= No
Syslog IP Address= 0.0.0.0
Log Facility= Local 1
DESCRIPTION
Press [SPACE BAR] and then [ENTER] to turn syslog on or off.
Enter the server name or IP address of the syslog server that will log the selected
categories of logs.
SNMP TRAP 3: link up
INFO Channel 0 ok
INFO LAN promiscuous mode <0>
SNMP TRAP 0: cold start
INFO main: init completed
INFO Starting Connectivity Monitor
INFO adjtime task pause 1 day
INFO monitoring WAN connectivity
WARN MPOA Link Down
WARN netMakeChannDial: err=-3001
WARN Last errorlog repeat 18 Times
INFO SMT Password pass
INFO SMT Session Begin
WARN netMakeChannDial: err=-3001
WARN Last errorlog repeat 216 Times
INFO SMT Session End
WARN netMakeChannDial: err=-3001
WARN Last errorlog repeat 65 Times
INFO SMT Password pass
Chapter 33 System Information & Diagnosis