Begin Page (Bp); Deactivate Font - IBM 6400 Programmer's Reference Manual

Table 7. Acknowledgement Reply
Byte Value
0
X 00
' '
X 01
' '
X 04
' '
X 06
' '
X ' 80 '
1-2 X 0000
'
3-4 X 0000
'
5-n
Notes:
1. Page (or Copy) Counters - This field identifies how many stacked pages
2. Special Data (SD) - Depending on the acknowledgment type (byte 0), this

Begin Page (BP)

Length D6AF Flag
This command is valid only in the home state and causes the printer to enter the
page state. The printer ignores the contents of the data field for this command.
However, the data field must contain four bytes of data.

Deactivate Font

Length D64F Flag
This command transmits one to six bytes of data to effect the deactivation of one
or more coded fonts.
Description
Acknowledgment Type:
A one byte field that identifies the type
of acknowledgement record and contents
(if any) of the Special Data area.
None
Sense Type and Model
Request Resource List
Obtain Printer Characteristics
Sense Bytes
- X FFFF Stacked Page Counter. See Note 1.
' ' '
Stacked Copy Counter. See Note 1.
'
Byte: This area contains zero or more bytes of
additional data as requested by the host program
defined by the Acknowledgement Type. Also see
note 2.
(Begin Page ... End Page) have been successfully completed.
field either is omitted or contains the requested data or the sense data. The
value in the two byte length field in the Acknowledge Reply header
determines the amount of data this command returns to the host.
Correlation ID
(Optional)
Correlation ID
(Optional)
Device Control Command Set
DATA
DATA
Chapter 3. IPDS Commands Reference
Error Code
31