IBM 6400 Programmer's Reference Manual page 174

X 023F02 X 024601
' ' '
•
Explanation:
1. The font inline sequence in Load Font Equivalence command is not
2. The Font Index specified in a Load Font Equivalence command called out by
Alternate Exception Action: None.
Explanation: The Target or Source Pel Count value on the Write Image Control
command is less than 1.
Alternate Exception Action: None.
Explanation: The Target or Source Pel Count value on the Write Image Control
command is greater than the valid or supported maximum.
Alternate Exception Action: None.
Explanation: The Target or Source Scan Count value on the Write Image Control
command is less than 1.
Alternate Exception Action: None.
Explanation: The Target or Source Scan Count value on the Write Image Control
command is greater than the valid or supported maximum.
Alternate Exception Action: None.
Explanation:
1. The Compression Algorithm value (Byte 8) is not a valid or supported value.
2. The (Pel) Data Format value (Byte 9) in the Write Image Control command is
Alternate Exception Action: None.
158
6400 IPDS
'
X ' 023F02 ' Font Index Not Loaded
supported or not supported with the current Text Orientation.
a Set Coded Font Local text control is not loaded.
X ' 024201 ' WIC Pel Count < Minimum Required
X ' 024301 ' WIC Pel Count > Maximum Allowed
X ' 024401 ' WIC Scan Count < Minimum Required
X ' 024501 ' WIC Scan Count > Maximum Allowed
X ' 024601 ' Invalid WIC Source Image Format
not X ' 00 ' .